You asked: What’s the best way to tie down a motorcycle on a trailer?

Where do you strap down a motorcycle?

When using straps, conventional wisdom says to snug the left front tie-down (attached high on the bike) first, just enough to get the slack out. Repeat with the right front tie-down; at this point, the kickstand should be off the floor, with the bike upright.

Do you need a wheel chock to trailer a motorcycle?

Securing a motorcycle to a trailer or the back of your pickup truck is vital if you want to transport it safely. … Most motorcycle tie-down tutorials will recommend using at least one chock. Wheel chocks are small wedges that you fit underneath the wheels of your bike, so it doesn’t move back and forth.

How many straps do you need to tie-down a motorcycle?

You will need two straps and two soft loops to ensure that your bike is secured properly. These should be attached to the corners of the vehicle or trailer you will be using for transportation.

How do you transport a motorcycle?

Your bike should be transported upright and will be supported by the straps. Put the chocks in place – to prevent the wheels of your motorcycle from moving or rocking you should place chocks in front of the front wheel and behind the back.

IT IS IMPORTANT:  Why does my motorcycle wobble at low speeds?

How does a motorcycle chock work?

These chocks are easy to use since they automatically lock the wheel as soon as you roll the bike into the cradle. The cradle takes on the weight of the bike, which triggers the bracket to lift itself and lock onto the wheel.

What means strap down?

To fasten or secure someone or something down (to something) with or as with straps. A noun or pronoun can be used between “strap” and “down.” Make sure you strap down that cargo before you start driving.

How can I transport my motorcycle without a truck?

A very simple way to move your bike without the use of a truck is by loading it into a small trailer. There are dedicated motorcycle trailers that feature built-in ramps, tie downs, even built-in wheel chocks, but even the most basic trailer will work with the appropriate tie-down points.