Quick Answer: Can you use car brake fluid for motorcycles?

What kind of brake fluid do motorcycles use?

Brake fluid is available in four grades: DOT 3, 4, 5, and 5.1. DOT 3, 4, and 5.1 fluids are glycol based and can be mixed together, but DOT 5 fluid is silicone based and can’t be mixed with any other type of fluid.

Can I use DOT 3 instead of dot 4 in motorcycle?

DOT 4 is adequate and does a good job. The reason for not using DOT 3 is that if the brakes get hot enough, the fluid will boil and cause your brakes to fade. DOT 4 will not have any more or less braking power than DOT 3. There’s most likely air still in the lines.

What brake fluid do dirt bikes use?

WHAT IS DOT 4? ÿMost DOT 3 fluids meet DOT 4 regulations and vice versa (save Motul’s Racing Brake Fluid 600, which has incredibly high dry and wet boiling points of 585 and 421 degrees).

Can you use regular brake fluid in a Harley Davidson?

Can You Mix Brake Fluid Types? You can’t mix DOT 5 with anything because it’s silicone-based, not glycol-based. The other types you can mix, but your boiling point won’t be as high as the higher grade.

IT IS IMPORTANT:  Question: How much does Harley Davidson cost?

Can I put DOT 5 in a DOT 3 system?

DOT 5 can be used as an upgrade or replacement for both DOT 3 and 4, but should not be mixed with any of the other fluids. … This fluid is identical to DOT 5 silicone in both boiling point and viscosity; however, it is compatible in the poly-glycol based systems and anti-lock brakes as well.

What is better DOT 3 or DOT 4?

The primary differences between the two include the following: DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. DOT 4 brake fluid has higher dry and wet boiling points, making it safer for higher temperatures.

Can I use DOT 4 in my motorcycle?

These type of brake fluids have different boiling points and usability. However, a DOT 4 recommended in a motorcycle and a DOT 4 recommended in a car will use the same DOT 4 brake fluid. There is absolutely no distinction between these brake fluids used in the car and the motorcycle.

Can you use car brake fluid on a dirt bike?

Yes. You can use automotive brake fluid in a motorcycle.

How much brake fluid does a dirt bike take?

50ml of brake fluid is enough to perform a bleed on one set of cycle brakes (front and rear). If the old brake fluid is particularly dirty or discoloured we recommend completely flushing out the old fluid and replacing with new.