How can I work a motorcycle without a stand?

Are motorcycle stands necessary?

Your motorcycle is a valuable machine that does have parts that can break in a fall. … The bike stand is necessary for protecting your bike against tips on hard pavement, a shop floor, or off-road areas with dirt and rocks that could scratch dent, or break off some of the components.

Why put a motorcycle on a stand?

A motorcycle center-stand is intended primarily for maintenance work, not for routine parking of a bike. It allows you to get one (or both) of the wheels off the ground to enable chain maintenance or removing one or both of the wheels. By default (on most modern bikes) it is the rear wheel that is lifted.

Can you change motorcycle oil without stand?

No it won’t hurt the bike to change the oil on the rear stand. You will however thank everyone on this board who told you to get one. Just about any maintenance done on the bike should be done with the bike on the rear stand for safety reasons and for ease of maintenance.

How do you winterize a motorcycle?

How to Winterize Your Motorcycle

  1. Have Your Bike Serviced. Inspect chains and belt to see if they need to be lubricated, advises ExtraMile. …
  2. Clean Your Bike. …
  3. Get An Oil Change. …
  4. Use Fuel Stabilizer. …
  5. Charge Your Battery. …
  6. Find Indoor Storage. …
  7. Update Your Motorcycle Coverage. …
  8. Related Resources:
IT IS IMPORTANT:  Can I ride a motorcycle without knowing how do you ride a bike?

When should you stand on a motorcycle?

Standing up on the pegs turns you into a dynamic part of your bike rather than just dead weight. It makes you an active part of the suspension. Off-road, it lets you see farther and above the dust. For long distances, standing with your legs fully extended and your knees locked is the least fatiguing.

What do you put under motorcycle kickstand?

There are several things that you can put under your kickstand like:

  1. A motorcycle kickstand pad.
  2. A small block of wood or a piece of plywood.
  3. A flat rock.
  4. A flattened soft drink can.
  5. A hockey puck.
  6. A jar’s lid.
  7. A round or square metal plate.
  8. A metal strip.

Can I lift my motorcycle with a car jack?

2. Using a car jack. A car jack can be a good alternative for lifting your motorcycle if you don’t have a motorcycle lift jack. Just like in the previous method, you might also want to slide several boards across the bike to assist with the hoisting.

Can you jack a motorcycle up by the engine?

Using a motorcycle jack requires that there be a flat surface under the engine to lift without adjustment. An uneven surface will cause the jack to lift unevenly and the bike will fall.

Where do you jack up a motorcycle?

To raise the front wheel, I generally use a simple scissor-style bike jack under the front of the skid plate. If you don’t have a center stand or one is not available for your bike, you can use a hydraulic motorcycle jack under your skid plate to lift the bike.