What type of chain Does my bike need?

What kind of chain do I need for my mountain bike?

Chains from most manufacturers should fit, as long as the chain is made from good quality material and matches the number of sprockets in your bike’s rear cassette. Some mountain bikes have 9, 10, 11, and sometimes even 12 sprockets in their rear cassette, and length of chain for each of these bikes will be different.

How do I know my chain size?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.

How do I know if my bike chain is too short?

You should also see two slight bends at each jockey wheel of the rear derailleur. If the chain is too short, this shift is difficult to make and the derailleur cage is stretched out and almost parallel to the chainstay. If the chain is really short, then you might not even be able to shift into the largest cog.

What size bike chain do I need single speed?

1/8″ chains are used exclusively for single speed setups. In addition to the other answers, I found it helpful to read that the nominal width of a chain (1/8 or 3/32) actually refers to the width of the sprocket.

Are 6 7 8 speed chains the same?

5, 6, 7 and 8 speed chains

Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm. … Going further narrower, like a 10, or 11 speed chain on an 8 speed cassette can and often does work.

What size is a 420 chain?

What Size Chain Do I Need?