Are Shimano Road and MTB chains the same?
Shimano road and MTB 10spd chains are slightly different, but you can interchange them if necessary, despite what Shimano say.
Does it matter what chain you put on a bike?
Because the distances between the sprockets vary on different ‘speed’ cassettes (e.g. the gap will be wider on a 9-speed block than on an 11-speed), you need a chain that fits. A chain for an 11-speed transmission will be narrower than one for a 9-speed, etc.
Are expensive bike chains worth it?
No. The only advantage of expensive chains within a specific brand is the minor reduction in weight. The ones with extra plating do look nicer and provide some corrosion resistance, but it takes almost no effort to keep your chain rust free.
Are Shimano and SRAM chains interchangeable?
Shimano and SRAM 11-speed chains are cross-compatible. If you have a Shimano 11-speed drivetrain, a SRAM chain will work fine and vice versa, however manufacturer’s recommend pairing your components for optimal performance.
How often should you change your bike chain?
To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles.
How do I know if my bike chain is too short?
You should also see two slight bends at each jockey wheel of the rear derailleur. If the chain is too short, this shift is difficult to make and the derailleur cage is stretched out and almost parallel to the chainstay. If the chain is really short, then you might not even be able to shift into the largest cog.
How do I know my chain size?
To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.